PX6 TOUCH PRO-A model ASTM automatic compression testers designed for perform compression strength tests according ASTM C39 and AASHTO T22 of testing 4 in and 6 in diameter specimens.
PX6 TOUCH PRO-A model ASTM automatic compression testers for concrete cylinders are produced from 1100 kN (250,000 lbf) to 3000 kN (660,000 lbf) capacity. With the PX6 TOUCH PRO-A model concrete compression testing machines are the classification of concrete samples according to their compressive strength properties can be done safely and easily.
PX6 TOUCH PRO-A models compression testing machines are consist of a high stiffness welded frame tested for stability to AASHTO T22 and ASTM C39, automatic hydraulic power pack with data acquisition and control system PX6.
Safety Features
Machines have sending together with max. pressure valve to avoid machine overloading, piston travel limit switch, emergency stop button, front door and rear transparent fragment guard.
Power Pack Features:
• Highly accurate DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
• PX6 TOUCH PRO-A automatic compression testers can be used for cylinders to ASTM C39 and AASHTO T22.
• The integrated control system features an intuitive 7 in color graphical display, which works like a tablet or smart-phone, and makes PX6 TOUCH PRO-A quick and simple to operate.
• Hardware and firmware are in total compliance with all the main international concrete testing standards including ASTM C39, ASTM C140, AASHTO T22 and EN 12390-3.
• The system is available in multiple languages English, French, Spanish, Russian and is fully compatible with non-Latin characters for Russian, Ukrainen.
PX6 TOUCH PRO-A supplied complete with following accessories;
• Spherical seat with ball seating assembly and upper platen dia.165×30 mm (6.5 in x1.2 in) for testing.
• Lower platen dia. 250×30 mm (9.8 in x 1.2 in) for testing.
• Distance piece dia. 7.7 in x1.6 in height (dia.195x40 mm height)
• Distance piece dia. 7.7 in x2 in height (dia. 195x50 mm height)
• Distance piece dia. 7.7 in x2.7 in height (dia.195x68 mm height)
• Distance piece dia. 7.7 in x4 in height (dia. 195x100 mm height)
• Piston
• Automatic Hydraulic Power Pack (7 in touch screen control and data acquisition unit)
• Software for computer. Moreover smartphones and tablet pc for upon customer request.
• Front door and rear transparent fragment guard.
PX6 Touch Control Unit
PX6 touch control unit is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units and blocks by controlling the compression machines.
All the operations of PX6 Touch are controlled from the front panel touch screen display.
PX6 Touch Control Unit has easy to use menu options.It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters.
Features for PX6 LCD Data Acquisition Control System
• Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics. Provides precise calibration with multi-point calibration (up to 10 points).
• Unit selection (kN, ton, lbf)
• Different menu languages can be selected via the device via language support. ( English, Spanish, French, Russian)
• USB communication signal output (communicates with computers)
• 2 each RS 232 serial communication signal outputs (communicates with computers)
• Connects to local networks and the Internet with Ethernet 10/100 network connection output (optional)
• Connects to portable devices via Bluetooth wireless connection (optional)
• 500 test results can be stored in internal memory. Due to the SD (memory) card connection, a large number of test results can be stored in the device memory (40,000 test results).
• Setting and calibration menus are password protected and prevent unauthorized use.
• The device can switch between one-touch load and deformation control modes.
• The industrial standard operates with 24 VDC supply voltage. Built-in voltage filter and regulator protects against input signal fluctuations
• Sensor modules are compatible with loadcell (load cell), pressure sensor (4-20 / 0-20 mA), potentiometric distance sensors, strain washers, thermocouples and all kinds of mV output sensors.
