3,002kN (660,000lbf) Automatic Compression Testers for Cylinders and Blocks

The ASTM 3,002kN (660,000lbf) Automatic Compression Testers for Cylinders and Blocks specimens maximum 500x300 mm, cubes up to 300 mm side and cylinders up to diameter 160x320 mm. Exceeding of the ASTM E447, ASTM C39, ASTM C140 standard provisions (starts with the 10% of the machine capacity), the C70BA32 is supplied in Class A starting from 6,000lbf. This exceptional performance enables the machines to be used for a considerable number of applications including:

3,002kN (660,000lbf) Automatic Compression Testers for Cylinders and Blocks supplied complete with following accessories;
1-Upper Platen
• Upper Platen: 12.2x16.1x3.5in (310x410x90 mm) (with ball seating assembly)
2-Lower Platen
• Lower Platen: 12.2x16.1x3.5in (310x410x90 mm)
3- Hydraulic Ram
• Hydraulic Ram: 12.5in (317.5mm)
4- Automatic Hydraulic Power Pack
• Automatic Hydraulic Power Pack, 700 bar (Profix6 touch screen control and data acquisition unit)
5- Software
• Software for computer, smartphones and tablet pc.

Safety Features
• Maximum pressure valves to avoid machine overloading
• Piston travel limit switch
• Emergency stop button
• Front and rear transparent durable plexiglas guards
• Software controlled maximum load value

Testable Specimens
• Concrete Block: Maximum 500x300 mm.
• Concrete Cylinder: 100x200 mm, 150x300 mm, 160x320 mm concrete cylinder samples or any other custom diameters cylinder can be tested with this machine.

LCD Data Acquisition Control System
The Data Acquisition Control provides real-time graphical indication. Automatically determines the load rate in accordance with the international standards upon sample type. With the STOP and START buttons, the test will automatically stop or start.
LCD Data Acquisition Control System has different units are available (kN / kgf / lbf). Can do Automatic Load Rate upon Sample Type. Total load and also per area are given. and has real time graph indication. Stops Automatically, when Test is completed. Test results can be send printer to with software or from the thermal printer. Can do calibration easily from 5 points. Manual Control is available. Computer and printer are not included in the price.
Software
The tests and calibration can be done and monitored with a computer by connecting it to the machine. LCD Control unit can connecting with RS232 or USB port to the machine. Using the state-of-the-art software provided by PROFIX6 with the machine will help performing and managing the tests in a very easy and fast way. By performing the tests via computer, the results can be saved and recalled when required. Reports can be generated automatically by the software and sent to printer.